CHAPTER 14 PC LOADER
Parameter Conversion Tool 14-45
14
Conversion execution
[7] After the parameter file is loaded and the conversion condition
setting is complete, click the “conversion execution”.
■ When an error message appears.
If the conversion conditions are insufficient, an error message appears.
Error item: Selection is not made in motor model before conversion.
Countermeasure: Select a model for motor model before conversion.
[7] When “conversion execution” is complete, the conversion result is displayed.
(3)
(6)
(5)
(4)
(2)
(1)
(7)
To Next Page
Loading...