4.5 Paper Jams
94
4
Troubleshooting
4.5.6 Paper Jams in Tray 5 (Bypass Tray)
Following describes how to remedy paper jams that occur on tray 5 (Bypass
Tray).
Procedure
1
Inspect the inside part (paper feed
entrance) of tray 5 (Bypass Tray), and
remove any jammed paper.
When two or more sheets of paper are loaded, remove all
of the sheets from the tray.
If paper is torn, check for any torn pieces of paper inside
the machine.
2
Fan the paper you removed making sure that all four corners are neatly
aligned.
3
Insert the paper into the tray with the
printing side facing down until its lead-
ing edge lightly comes up against the
paper feed entrance.
To Next Page
Loading...
Need help?
General
