5.2 Entering and Exiting the System Administration Mode
112
5
System Administration Mode Settings
3
Select either User Mode or System Settings.
■When the User Mode button is selected
If you select the User Mode button, you can make copies or scan documents in the System Adminis-
tration Mode.
If you press Machine Status button or Job Status button while still in User Mode in the System
Administration Mode, printer or copier meter reports can be output.
■When the System Settings button is selected
When you select the System Settings button, you can change the settings of each feature.
For details on how to set features, see “5.2.3 Setting System Settings in the System Administration
Mode” (P. 113).
5.2.2 Exiting the System Administration Mode
Following describes the procedure for exiting the System Administration Mode.
The following example is for when system settings have been changed.
1
When you have finished entering and changing settings, select Close
repeatedly until the System Settings screen is displayed.
2
Select Close.
This exits the System Administration Mode.
System Adminstrator Menu
User Mode
System Settings
Close
System Settings
System Settings
Auditron
Administration
Setup Menu System Administrator
Password
To Next Page
Loading...
Need help?
General
