ii
The following shows a list of samples made using the copy features of this machine. The
illustrations used in these samples have been modified slightly to simplify explanations for
these copy features.
Making one sided/two sided
copies
“3.3 Making One sided/Two sided Copies - 2 Sided”
(P. 299) in “Part 2 Copier”
Report
A
B
Report
Making enlarged/reduced copies
“3.4 Making Enlarged/Reduced Copies - Reduce
Enlarge” (P. 306) in “Part 2 Copier”
Inserting blank sheets be-
tween copied transparencies
“3.14 Inserting Blank Sheets Between Copied Transparencies
- Transparency Separators” (P. 357) in “Part 2 Copier”
3
A
B
2
Report
1
Sorting copies before output
“3.6 Sorting Copies Before Output - Output”
(P. 324) in “Part 2 Copier”
3
A
B
2
Report
1
3
A
B
2
Report
1
3
3
A
B
2
A
B
2
Report
1
Report
1
Making copies from a bound
document onto separate sheets
“3.12 Making Copies From a Bound Document Onto Separate
Sheets - Bound Originals” (P. 351) in “Part 2 Copier”
Making two sided copies from
a bound document
“3.25 Making Two sided Copies From a Bound Doc-
ument - Book Duplex” (P. 391) in “Part 2 Copier”
Report
A
B
C
D
No.1
No.1
A
B
Blank
sheet
Features in Brief