1.3 Power Saver Mode
23
Getting to Know Your Copier
1
■From Last Selection to Low Power Mode
Set the time to move to the Low Power Mode after the last operation.
●
The default for From Last Selection to Low Power Mode is 15 minutes.
●
The Low Power Mode cannot be set to Disabled.
■From Low Power Mode to Sleep Mode
Set the time to move to the Sleep Mode from the Low Power Mode.
The default for From Low Power Mode to Sleep Mode is 45 minutes.
12
Select Save.
13
Select Close repeatedly until the System Settingsscreen is displayed.
The screen returns to the System Settings screen.
14
Select Exit to exit the System Administration Mode.
1.3.2 Exiting the Power Saver Mode
The following describes how to exit the Power Saver mode.
The Power Saver mode is exited in the following instances:
●
By pressing the Power Saver button
●
By reception of print data
Procedure
1
Press Power Saver.
The Power saver button goes out to indicate that the Power Saver feature is canceled.
To Next Page
Loading...