Fuji Xerox DocumentCentre C400 Series User Manual

3.7 Outputting to the Finisher Tray - Output/Stapling
328
3
User Friendly Features
Basic Copying Added Features Image Quality Others
Staple Position
The following table shows the staple positions on the left, right and up sides
when the document is viewed in the direction that it is read (top side up).
About Orientation when Loading Documents
Load documents as follows when loading the document with its head to left.
3.7.1 Outputting to the Finisher Tray
When the Light Finisher (option) is installed, copies are output shifted when the
Finisher Tray is specified as the output destination.
For details about how to output copies, see “3.6 Sorting Copies Before Output - Output” (P. 324).
Procedure
1
Load the document.
For details about loading documents, see “1.2 Loading Documents” (P. 270).
Stapling
Position
1 on Left 2 on Left 2 Up 1 on Right 2 on Right
Paper Size
B5 , A4 , 8.5
× 11 ,
16K
A4*, B4, A3, 8
× 10*,
8.5
× 11*,8.5 × 13*,
8.5
× 14*, 8K,11 × 17
Note: Stapling at two
locations is not possible
on paper marked by *.
A
A
A
A
A
A
A
A
A
A
A
A
A
A

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English