3.18 Adjusting Copy Density and Contrast - Lighter/Darker/Contrast
372
3
User Friendly Features
Basic Copying Added Features Image Quality Others
Procedure
1
Load the document.
For details about loading documents, see “1.2 Loading Documents” (P. 270).
2
Select Light/Dark/Contrast in the Image Quality screen.
The Lighter/Darker/Contrast screen is displayed.
3
To adjust the copy density, select the desired density using . To
adjust the contrast, select the desired contrast using .
4
Confirm the settings, and select Save.
The screen returns to the Image Quality screen.
5
Select Output Color in the Basic Copying screen. Select other features
if necessary.
To cancel setting, select the Cancel button.
6
Enter the number of copies using the numeric keypad, and press Start.
Copies are made at the density and contrast you set.
Color Shift
Normal
Color Balance
Y: 0 0 0
M
: 0 0 0
C
: 0 0 0 K: 0 0 0
Original Type
Text & Photo
(Halftone)
Image Quality Presets
Normal
Auto Exposure
On
Sharpness/Saturation
Sharpness: Normal
Saturation: Normal
Light/Dark/Contrast
L/D : Normal
Contrast: Normal
Menu
Image Quality
Others
Basic Copying
Added
Features
SaveCancel
Lighter/Darker/Contrast
Lighter/Darker
Lighter
Normal
Darker
Contrast
Higher
Normal
Lower
To Next Page
Loading...