5.8 Scan Mode Settings
178
5
System Administration Mode Settings
5.8.3 Scan Size Default
Set the size at which documents are displayed at Scan Size in the Scan Options
screen. Any scan size other than Auto Size Detect can be assigned to scan size
buttons 1 to 11.
Setting non-standard sizes, for example, when frequently scan non-standard
size documents frees you from the need to enter the scanning size each time
that you scan a document. When entering non-standard sizes, set the size at
Enter Size within the range 15 to 432 mm for the X (horizontal) direction and 15
to 297 mm for the Y direction (vertical) in 1 mm increments. The size set at Enter
Size is displayed as OOO x OOO.
For details about scanning sizes, see “3.3.6 Scan Size” in “Part 2 Scanner” of the User Guide (Printer/
Scanner).
Scan Size 1 to 11
The following table shows the sizes that can be set to scan size defaults. Select the desired button to
set the desired scan size.
(The defaults are as follows in order from Scan Size Defaults 1 (Top Left).)
A3 , A4 , A4 , A5 , B4 , B5 , 11× 17" , 8.5 × 11 , 8.5 × 11" , Photo 2L ,
Photo L
A Series B Series Dis-
play
A3 , A4 , A4 , A5 , A5 , A6 , A6 , B4 , B5 , B5 ,
B6 , B6
Inch Size Display
11 × 17" , 11 × 15" , 8.5 × 14" ,
8.5 × 13" , 8.5 × 11" , 8.5 × 11" ,
5.5 × 8.5" , 5.5 × 8.5"
Other
Photo 2L , Photo L , 8K , 16K , 16K
Enter Size Set the size in the X (horizontal) direction within the range 15 to
432 mm and in the Y (vertical) direction within the range 15 to
297 mm in 1 mm increments.
To Next Page
Loading...
Need help?
General
