Fuji Xerox DocumentCentre C400 Series User Manual

5.4 Setting the System Settings (Common Settings)
126
5
System Administration Mode Settings
7. Fault Tone
Set the tone to sound when a fault (e.g. document or paper jam) has occurred and the job is held in an
abnormal state. You can select Off to not sound a tone, or select one of Loud, Normal or Soft as the
volume.
(Default is Normal.)
8. Low Toner Alert Tone
Set the tone to sound when it is time to replace a drum cartridge or toner cartridge. You can select
Off to not sound a tone, or select one of Loud, Normal or Soft as the volume.
(Default is Normal.)
5.4.3 Setting Screen Defaults
Set the default screen display when the power is turned on.
Screen Defaults allows you to set the following items:
1. Screen Default at Power On
Select one of Features, Job Status or Machine Status screen to set as the default screen display when
the power is turned on.
(Default is Features.)
2. Features Screen Default
Select one of Menu, Copy or Scan as the default screen display when the Features button is pressed.
(Default is Copy.)
The Fax can be set for models installed with a fax feature.
●
1. Screen Default at Power On
●
2. Features Screen Default

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English