Fuji Xerox DocumentCentre C400 Series User Manual

7.2 Confirming Jobs
246
7
Confirming Jobs
4
Confirm the status of the selected job in this screen.
■To cancel a job
Select the Stop button. This cancels processing of the currently executing or queued job.
■To change the print priority
You can change the print priority when there are two or more queued jobs. Select the Promote Job but-
ton. The print order will be changed so that the job you instructed higher print priority to will be
printed after the currently executing job. Note, however, that if you continue to change the print prior-
ity again after changing the print order in the print schedule, priority will be given to the job that you
last instructed, and the mark will be displayed at Status in the Job Status screen.
5
Select Close.
The screen returns to the Job Status screen.
7.2.2 Changing the Print Priority
The print order of jobs queued for printing can be changed. If there are two or
more queued jobs in the list, you can change the print order so that jobs are
printed in the order that they were received.
1
Press Job Status.
The Job Status screen is displayed.
2
Select Print Waiting Jobs.
Queued jobs in the list are printed according to the print priority.
If there are no queued jobs in the list, the Print Waiting Jobs button cannot be selected.
2
A4
: Fuji Taro
: (CentreWare)
: document
0/5
120/120
Quantity :
Pages :
1 Sided
Center Output Tray
Stop
Promote Job
Print Job
:Doc. No. 00010
Close
Stored
Documents
Current and
Pending Jobs
Completed Jobs
Job Status
00117-Copy Job Copying A4 : 100% 25/100
Doc. No. - Job Type Status Remote Terminal/Contents
Pages
Print
Waiting Jobs
00010-Print Job Print Wait Fuji Taro : MDG 0/120
00015-Print Job Print Wait Fuji Taro : MDG 0/50

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English