Fuji Xerox DocumentCentre C400 Series User Manual

357
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.14
Inserting Blank Sheets Between
Copied Transparencies -
Transparency Separators
A blank sheet can be output inserted as a separator between copied transparencies. When
the Distribution Copy feature (option) is installed, the required number of copies can also be
printed at the same time. When using this feature, load transparencies in Tray 5 (Bypass
Tray). When loading transparencies in Tray 5 (Bypass Tray), make sure that the paper for
the separators (or for distribution) is loaded at the same orientation that the transparencies
are loaded.
●
Blank Separators
A blank sheet of paper is inserted as a separator each time that a transparency is copied. Only one set of copies can
be made.
●
Separators + N Sets
A blank sheet of paper is inserted as a separator each time that a transparency is copied. At the same time, the
required number of copies for distribution are printed.
●
No Separators + N Sets
Copies are made on transparencies, and at the same time, the required number of copies for distribution are
printed.
●
Do not load transparencies in trays 1 to 4. Doing so might cause the machine to malfunction or paper to jam.
●
Use only 3R6002/3R6019 transparencies.
3
Transparencies
Separators
Copy
A
B
2
3
A
B
2
Report
1
Report
1
Document
3
Transparencies
Separators
Copy
A
B
2
3
A
B
2
Report
1
Report
1
Document
3
A
B
2
Report
1
Copy for distribution

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English