Fuji Xerox DocumentCentre C400 Series User Manual

295
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.2
Selecting the Color to
Copy - Output Color
The color can be selected when making copies. Following shows the available color modes:
●
Auto
The machine automatically judges the color of the original, and makes copies in full color if the document is color,
and in one color (black) if the document is black-and-white.
●
Full Color
The machine makes copies in full color using four colors of toner, Yellow, Magenta, Cyan, and Black.
●
Black
The machine makes copies in black only in spite of the document’s colors.
●
Dual Color
The machine makes copies of color documents in two preset colors. The color of color areas and black areas in the
document can be specified.
●
Other Color Modes
Dual Color and Single Color can be set.
●
The default setting of the color mode can be changed in the System Administration Mode. For details about how
to change the defaults, see “5.5 Copy Mode Settings” (P. 139) in “Part 1 Hardware”. The default setting is
Black.
●
If color limits have been set in totals management, copies cannot be made in the restricted colors. For details
about color restrictions, see “6.3.2 Setting Color Mode/Maximum Number” (P. 201) in “Part 1 Hardware”.
●
When Negative Image is selected, Dual Color cannot be selected. Also, when Single Color or Dual Color is
selected, Original Type cannot be selected.
●
For details about how to set user custom colors, see “5.5.6 Custom Colors” (P. 156) in “Part 1 Hardware”.
Color document
B/W document
Copy
<U>Full Color<U>
<U>Black<U>
<U>Dual Color<U>
(When Red/
Black is set)
<U>Single Color<U>
(When Magenta
is set)
Copy
<U>Black<U>
<U>Single Color<U>
(When Green is set)
Full Color Black Dual Color
(When Red/Black is set)
Single Color
(When Magenta is set)
Black Single Color
(When Green is set)

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English