Fuji Xerox DocumentCentre C400 Series User Manual

333
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.8
Moving the Position of
Images in the Copy - Mar-
gin Shift
Copies can be made with the position of the image in the document to the left, right, top or
bottom, or with the center of the document moved to the center of the output copy. Copies
can also be output with a margin on the top, bottom, left or right. When making two sided
prints, you can set the shift positions for both the Side 1 and Side 2.
The settings for shifting the copy position are as follows:
●
No Shift
Copies are made without the position of the image in the document shifted.
●
Auto Center
Copies are made so that the center of the document matches the center of the output copy.
●
Corner Shift
Copies are made with the image in the document shifted to the edges or corners of the output copy. You can select
from eight output shift directions.
●
Variable Shift
Copies are made with the image in the document shifted to the left, right, top or bottom by any required amount.
Enter the required amount within the range 0 to 50 mm in 1 mm increments.
●
When Mixed Size Originals is set, the position is shifted referenced to the position of the image on the first sheet of
the document.
●
When stapling copies, either select Corner Shift, or shift the image by amount of margin at Variable Shift.
●
The default setting for Margin Shift can be changed in the System Administration Mode. For details about how to
change the default for this feature, see “5.5 Copy Mode Settings” (P. 139) in “Part 1 Hardware”. The default set-
ting is No Shift for both Side 1 and Side 2.
●
The shift direction operates on the direction that the document was loaded. If the Original Orientation differs
from the direction in which the document is loaded, the shift direction also will differ. For details, see “3.31 Spec-
ifying the Document Orientation - Original Orientation” (P. 417) in “Part 2 Copier”.
●
The image shift amount is set on the output copy. The image shift amount will not be affected even if copies are
enlarged or reduced at Reduce/Enlarge. When Booklet is set, copies are always output placed in the center.
Margin adjust
A
B
A
B
(5 mm added
to Right)
(5 mm added
to Left)
Copy position shift
<U>Corner Shift<U> <U>Auto Center<U>
Document
A
B
Document
Corner Shift Auto Center

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English