343
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.10
Specifying the Document
Scanning Size Before Making
Copies - Original Size
Specify the size of the document when scanning non-standard size documents or when
making copies at a size different from the size of the currently loaded document.
There are three ways of specifying the size of documents:
●
Auto Size Detect
The machine automatically recognizes the size of the document.
●
Standard Size
Select the size of the document from the 11 preset sizes (A5, A5 , B5, B5 , A4, A4 , 8.5 × 11", 8.5 × 11" , 11
× 17", B4, A3).
●
Free
Enter the desired scanning size when scanning non-standard size documents or when making copies at a size dif-
ferent from the size of the currently loaded document. The size can be specified in 1 mm increments within the
range 15 to 432 mm when the document is placed horizontally (X) on the document glass, and within the range 15
to 297 mm when the document is placed horizontally (Y). We recommend using the scale on the outside of the
document glass to help you specify the document size.
●
This feature cannot be combined with the Mixed Size Originals
●
The default setting for Original Size can be changed in the System Administration Mode. For details about how to
change the default for this feature, see “5.5 Copy Mode Settings” (P. 139) in “Part 1 Hardware”. The default set-
ting is Auto Size Detect.
Procedure
1
Load the document.
For details about loading documents, see “1.2 Loading Documents” (P. 270).
Document
Copy
Question
Question
Answer
X
Y
To Next Page
Loading...
Need help?
General
