5.8 Scan Mode Settings
180
5
System Administration Mode Settings
5.8.5 Reduce/Enlarge Presets
Set the ratios that are displayed at Reduce/Enlarge Presets at Reduce/Enlarge
in the Scan Options screen.
Any ratio can be assigned to R/E preset 1 to 7 other than 100%.
Setting frequently used scan ratios frees you from unnecessarily setting the scan
ratio each time you scan a document.
For details about setting R/E Presets, see “3.3.7 Reduce/Enlarge” in “Part 2 Scanner” of the User
Guide (Printer/Scanner).
R/E Preset 1 to 7
Enter the setting values using the numeric keypad referring to the table below.
(The defaults are as follows in order from the R/E Preset button 1: 3 or 50.0%, 7 or 70.7%,
8 or 81.6%, 9 or 86.6%, 10 or 115.4%, 11 or 122.4%, 13 or 141.4%.)
Setting
Value
Description
Setting
Value
Description
1 25.0% 10 115.4%
2 35.3% 11 122.5%
3 50.0% 12 129.4%
4 57.7% 13 141.4%
5 61.2% 14 163.2%
6 64.7% 15 173.2%
7 70.7% 16 200.0%
8 81.6% 17 282.8%
9 86.6% 18 400.0%
To Next Page
Loading...