378
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.21
Adjusting Color Balance -
Color Balance
The strength of the four colors (yellow, magenta, cyan and black) can be adjusted in seven
levels for each of their low, intermediate and high density ranges.
●
The default setting for Color Balance can be changed in the System Administration Mode. For details about how
to change the default for this feature, see “5.5 Copy Mode Settings” (P. 139) in “Part 1 Hardware”. The default
setting is 0 as Normal.
●
Only Black can be selected in color balance adjustment when Output Color is set to Black.
●
If Color Balance is selected when Image Quality Presets is set, the value set to Image Quality Presets will be can-
celed.
Procedure
1
Load the document.
For details about loading documents, see “1.2 Loading Documents” (P. 270).
2
Select Full Color at Output Color in the Basic Copying screen.
Copy
Document
<U>More dominant
Cyan<U>
<U>More dominant
Magenta<U>
<U>More dominant
Yellow<U>
<U>More dominant
Black<U>
More dominant
Cyan
More dominant
Magenta
More dominant
Ye l l o w
More dominant
Black
Menu
Image Quality
Others
Basic Copying
Added
Features
Output Color Paper Supply
1 A4
2 A3
Auto
More...
Reduce/Enlarge
Auto%
100%
More...
50% A3->A5
70% A3->A4,B4->B5
2 Sided
1->2 Sided (H to H)
1->1 Sided
More...
2->2 Sided (H to H)
2->1 Sided (H to H)
Full Color
Auto
Black
Dual Color-Red/Black
More...
Plain
Plain
3 8.5 11’’
Plain
To Next Page
Loading...
Need help?
General
