292
3
User Friendly Features
3.1
How to Switch the Screen
Display
This section describes how to view screens required for copy operations and how to switch
screen displays. For copy operations, press the Features button on the control panel to dis-
play the Copy (Basic Copying) screen.
Select the Menu button in the Copy screen. The Menu screen is displayed. If you select the
Copy button in the displayed screen, the Copy screen is displayed. Perform this operation if
the copy screen is not displayed.
Various copy features are displayed on the Copy screen in the form of buttons.
On machines installed with the fax feature, the Fax button is displayed on the Menu screen. For details about the fax
feature, see the User Guide (Facsimile).
How to View/Switch the Copy Screen
Copy operations are performed in the copy screen. The copy screen has four
tabs, Basic Copying, Added Features, Image Quality, and Others.
The screens that are displayed from each of the tabs are each called the Basic
Copying screen, Added Features screen, Image Quality screen, and Others
screen.
In each of these screens, features are displayed in the form of buttons. How
these features buttons are displayed differs according to which optional accesso-
ries are installed.
Default settings are set to each of the features. These default settings can be
changed in the System Administration Mode. For details about how to change
the defaults, see “5.5 Copy Mode Settings” (P. 139) in “Part 1 Hardware”.
This chapter basically describes examples where an offset catch tray are
installed.
Menu
Image Quality
Others
Basic Copying
Added
Features
Output Color Paper Supply
1 A4
2 A3
Auto
More...
3 8.5 11’’
Reduce/Enlarge
Auto%
100%
More...
50% A3->A5
70% A3->A4,B4->B5
2 Sided
1->2 Sided (H to H)
1->1 Sided
More...
2->2 Sided (H to H)
2->1 Sided (H to H)
Full Color
Auto
Black
Dual Color-Red/Black
More...
Plain
Plain
Plain
Menu
Copy Scan
Back:
Fax
To Next Page
Loading...
Need help?
General
