Loading Paper
35
2
2.3
Changing Paper Settings
Following describes how to change the paper size on trays 1 to 4 and how to set image
quality processing by individual paper type.
Eight paper types, plain paper, bond paper, recycled paper, and custom paper 1 to 5 can be
set. For custom paper 1 to 5, the user assigns any name to plain paper, bond paper, and recy-
cled paper.
Image quality best suited to the paper type can be obtained by setting the desired image
processing to particular paper types.
For details about how to set names to custom paper 1 to 5, see “ Custom Paper Name” (P. 127) in “5.4.4 Setting
Paper Tray Attributes”.
Procedure
1
Press Password/System Settings.
The System Settings screen or System Administrator - Password Entry screen is displayed. The Enter
Password screen is also displayed when the totals management feature is active.
●
The System Administrator - Password Entry screen is displayed when a System Administration
Mode has been set. When the administrator’s password has not been set, and you press the Pass-
word/System Settings button, the System Settings screen is displayed.
●
When the System Administrator - Password Entry screen is displayed, enter the password, see
“5.2.1 Entering the System Administration Mode” (P. 111).
2
Select System Settings.
The System Settings screen is displayed.
3
Select Common Settings.
The Common Settings screen is displayed.
Close
System Settings
System Settings
Auditron
Administration
Setup Menu System Administrator
Password
Close
System Settings
Common Settings Copy Mode Settings
Network Settings
Print Mode Settings Scan Mode Settings
To Next Page
Loading...
Need help?
General
