3.3 Cleaning the Copier
63
3
Daily Care
3.3.2 Cleaning Internal Components (Raster
Output Scanners)
Following describes how to clean internal components (ROS: Raster Output
Scanners).
Normally, clean Raster Output Scanners after you have replaced the toner col-
lection bottle. Also, clean Raster Output Scanners when image-quality defects
such as white or color streaks appear during copying or printing.
●
A cleaning rod is provided on the rear of the front door.
●
Before you clean the Raster Output Scanners, first remove the toner collection bottle. Toner spills
out of the toner collection bottle when it is placed at an angle. So, we recommend laying paper on
the floor before replacing Raster Output Scanners.
Procedure
1
Make sure that the machine has
stopped before opening the front cover.
2
Open the black cover on the front of
the machine body (B) downwards by
holding the orange knobs on the left
and right.
To Next Page
Loading...