1.2 Switching on/off the Power
17
Getting to Know Your Copier
1
3
When the power turns on, the message “Please wait...” is displayed on
the display.
The “Please wait...” message indicates that the machine is warming up. The machine cannot be used
while it is warming up. After about 30 seconds, the machine becomes ready for use.
After a while, the Copy screen is dislayed.
1.2.2 Switching Off the Power
The following describes the procedure for turning the power off.
When the power is turned off, all information stored to the machine’s memory will be erased.
Procedure
1
Before turning the power off, make sure that all copy or print jobs have
completely finished. Also, make sure that the Online and Job in Mem-
ory indicators are output.
Never turn the power off in the following instances:
●
While data is being received
●
While jobs are being printed
●
While jobs are being copied
●
While a scan is being executed
Please wait...
Control ROM :XXX.X.XX
Frame ROM :XXX.X.XX
Menu
Image Quality
Others
Basic Copying
Added
Features
Output Color Paper Supply
1 A4
2 A3
Auto
More...
Reduce/Enlarge
Auto%
100%
More...
50% A3->A5
70% A3->A4,B4->B5
2 Sided
1->2 Sided (H to H)
1->1 Sided
More...
2->2 Sided (H to H)
2->1 Sided (H to H)
Full Color
Auto
Black
Dual Color-Red/Black
More...
Plain
Plain
Plain
3 8.5 11''
To Next Page
Loading...
Need help?
General
