432
Appendix
B
Optional Accessories
The following table lists the main optional accessories. For details, contact our Customer
Support Center.
●
Product types is subject to change without notice.
●
For the latest information, contact our Customer Support Center.
PostScript Software Kit
When the PostScript Software Kit is installed, this machine can be used as a
PostScript printer. Printing is also possible from a Macintosh.
Product Name Description
Offset Catch Tray This kit is for shifting the output position of copies.
128MB Memory Kit This kit expands memory up to 128MB.
256MB Memory Kit This kit expands memory up to 256MB.
PostScript Software Kit PostScript Software Kit
Light Finisher This Light Finisher staples prints or copies before output-
ting them.
TokenRing Option-Kit This kit enables communications over the TokenRing inter-
face.
Face Up Side Tray Kit This kit enables paper to be output with its top side facing
up.
Internet FAX Option If this option is installed on models not installed with Fax
features, the same functions as a model with Fax features
can be used.
Additional FAX G3 Kit The FAX G3 Kit and Additional FAX Port Kit are needed to
install this kit. This kit allows you to add on a FAX communi-
cations (G3 mode) line.
Additional FAX Port Kit This kit is needed to use the Additional FAX G3 Kit.
Power cord This power cord is exclusively for this machine.
IIT Anti-vibration Kit This kit provides vibration resistance in the event of an
earthquake, other natural disasters, or accidents.
To Next Page
Loading...
Need help?
General
