Fuji Xerox DocumentCentre C400 Series User Manual

6.5 Confirming the Total Number of Copied/Printed Pages
215
6
Managing Totals and Outputting Reports
Printing Meter Reports
The following describes the procedure for printing Print Meter Reports and Meter
Reports. To print meter reports, the password for entering the System Adminis-
tration Mode must be set, and the totals management feature active.
●
For details about how to set the password for entering the System Administration Mode, see “5.3
Setting and Changing System Administrator’s Passwords” (P. 117).
●
For details about how to activate the totals management feature, see “6.2 Confirming the Totals
Management Feature” (P. 196).
Procedure
1
Press Password/System Settings.
The Password Entry screen is displayed.
2
Enter the password, and select Confirm.
The machine enters the System Administration Mode, and the System Administration Mode screen is
displayed.
3
Select User Mode.
Copying and scanning are possible even in the System Administration Mode if the User Mode button is
selected. If you press the Machine Status button or the Job Status button while still in User Mode in
the System Administration Mode, meter reports can be output.
✽✽✽✽✽
Cancel
Password Entry
Password
Confirm
System Adminstrator Menu
User Mode
System Settings

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English