5.4 Setting the System Settings (Common Settings)
128
5
System Administration Mode Settings
Paper Type
Set the type of paper to be loaded in trays 1 to 4 and Tray 5 (Bypass).
1. to 4. Trays 1 to 4
Set the type of paper to be loaded in trays 1 to 4.
Plain paper, recycled paper, bond paper, and custom paper 1 to 5 can be loaded in these trays.
Enter the setting values using numeric keypad referring to the table below.
(Default is 0 as Plain Paper.)
5. Tray 5 (Bypass)
Set the type of paper to be loaded in Tray 5 (Bypass). The setting made here will become the default
setting value when making copies and the setting when the paper type is not notified by the client
when making prints.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Plain Paper.)
Various image quality settings can be selected for Bond paper, Plain paper, Recycled paper and Custom paper
1 to 5. For details, see “ Image Quality” (P. 130).
Setting Value Description
14 Bond paper
0 Plain paper
3 Recycled paper
161 Custom paper 1
162 Custom paper 2
163 Custom paper 3
164 Custom paper 4
165 Custom paper 5
16 Lightweight paper: This can be set only when Tray 5 (Bypass) is
used.
5 Transparency: This can be set only when Tray 5 (Bypass) is used.
1 Heavyweight paper 1: This can be set only when Tray 5 (Bypass) is
used.
8 Heavyweight paper 2: This can be set only when Tray 5 (Bypass) is
used.
12 Heavyweight paper 1: (side 2) This can be set only when Tray 5
(Bypass tray) is used.
13 Heavyweight paper 2: (side 2) This can be set only when Tray 5
(Bypass tray) is used.
17 Labels: This can be set only when Tray 5 (Bypass) is used.
To Next Page
Loading...
Need help?
General
