5.3 Setting and Changing System Administrator’s Passwords
119
5
System Administration Mode Settings
5.3.2 Changing Passwords
This section describes the procedure for changing an already set System Admin-
istrator’s password.
Procedure
1
Press Password/System Settings.
The System Administrator - Password Entry screen is displayed.
2
Enter the password using the numeric keypad, and select Confirm.
The System Administration Mode screen is displayed.
●
The password you entered is displayed as
∗
. If you made a mistake when entering the password,
press the Clear button and enter the password again.
●
To cancel password entry, select the Cancel button. The screen returns to the setup item screen.
3
Select System Settings.
The System Settings screen is displayed.
Cancel
System Administrator - Password Entry
Password
Confirm
*****
System Adminstrator Menu
User Mode System Settings
To Next Page
Loading...