Fuji Xerox DocumentCentre C400 Series

5.3 Setting and Changing System Administrator’s Passwords
118
5
System Administration Mode Settings
3
Select On, and enter the new password using the numeric keypad.
4
Select Enter.
5
Enter the same password again as in step 3, and select Enter.
Enter the same number at steps 3 and 5. If you made a mistake when entering the password, select the
Reset button, and repeat the procedure from step 3.
6
Select Close.
The screen returns to the System Settings screen.
7
Select Exit to exit the System Administration Mode.
Close
System Administrator Password
New Password
Confirm Password
EnterReset
Off
On
Close
System Administrator Password
New Password
Confirm Password
EnterReset
Off
On
*****
Close
System Administrator Password
New Password
Confirm Password
EnterReset
Off
On
*****