5.5 Copy Mode Settings
141
5
System Administration Mode Settings
5.5.2 Copy Defaults
Set the defaults for the various copy features. The machine returns to the
defaults set here when the power is turned on, when the machine exits the
Power Saver mode, or when the Clear All button is pressed. Setting frequently
used features and values to their defaults frees you from unnecessary opera-
tions each time you perform a specific operation.
Copy Defaults allows you to set the following items:
1. Output Color
Set the default of Output Color in the Basic Copying screen.
Select from No Default, Auto, Full Color, Black, Dual Color, and Single Color.
(Default is Black.)
●
When No Default is selected, the machine stands by for selection of the Output Color and copying cannot be
started unless the Output Color is selected in the Basic Copying screen.
●
When Black is selected in the Basic Copying screen, the copy result will be of the same image quality as Half-
tone under Text & Photo.
●
When Output Color’s Dual Color or Single Color is selected in the Basic Copying screen, the Original Type
setting will be invalid.
For details about the Output Color, see “3.2 Selecting the Color to Copy - Output Color” (P. 295) in “Part 2
Copier”.
●
1. Output Color
●
16. Original Type (Black)
●
2. Single Color
●
17. Auto Exposure
●
3. Dual Color - Color Image
●
18. Lighter/Darker
●
4. Dual Color - B/W Image
●
19. Contrast
●
5. Reduce/Enlarge
●
20. Sharpness
●
6. Paper Supply
●
21. Color Saturation
●
7. 2 Sided
●
22. Color Shift
●
8. Output
●
23. Color Balance - Yellow
●
9. Output Destination
●
24. Color Balance - Magenta
●
10. Margin Shift - Side 1
●
25. Color Balance - Cyan
●
11. Margin Shift - Side 2
●
26. Color Balance - Black
●
12. Border Erase - Top & Bottom
●
27. Original Orientation
●
13. Border Erase - Left & Right
●
28. Image Rotation
●
14. Center Erase
●
29. Rotation Direction
●
15. Original Type (Auto/Full Color)
To Next Page
Loading...
Need help?
General
