5.5 Copy Mode Settings
140
5
System Administration Mode Settings
1. to 3. Paper Tray - 2nd to 4th Buttons
The 2nd to 4th button from the top downwards can be changed for each of the five feature buttons
displayed at Paper Supply in the Basic Copying screen. Trays 1, 2, 3, 4, and 5 (Bypass) can be set.
Enter the setting values using the numeric keypad referring to the table below.
(Defaults are as follows from the top. 2nd button:1 as Tray 1, 3rd button:2 as Tray 2, 4th
button:3 as Tray 3.)
4. to 5. Reduce/Enlarge - 3rd to 4th Buttons
The 3rd to 4th button from the top downwards can be changed for each of the five feature buttons
displayed at Reduce/Enlarge in the Basic Copying screen.
Select the desired ratio from the ratios registered to the R/E Preset buttons.
Enter the setting values using the numeric keypad referring to the table below.
(Defaults are as follows from the top. 3rd button:2 as 70.7%, 4th button:7 as 141.4%.
For details on setting the R/E Preset buttons, see “5.5.5 Reduce/Enlarge Presets” (P. 155).
Setting Value Description
1Tray 1
2Tray 2
3Tray 3
4Tray 4
5 Tray 5 (Bypass)
Setting Value Description
1 Ratio currently set to R/E Preset 1
2 Ratio currently set to R/E Preset 2
3 Ratio currently set to R/E Preset 3
4 Ratio currently set to R/E Preset 4
5 Ratio currently set to R/E Preset 5
6 Ratio currently set to R/E Preset 6
7 Ratio currently set to R/E Preset 7
To Next Page
Loading...
Need help?
General
