2.1 Overview of Basic Copy Features
280
Making Copies
2
If you do not perform any operation for a fixed period of time while the above screen is displayed, the
Auto Clear feature is activated, and the machine automatically judges that there is no next document.
The default for the Auto Clear time can be changed in the System Administration Mode. For details
about how to change the default setting for this feature, see “5.4.1 Machine Clock/Timers” (P. 123)
in “Part 1 Hardware”. The default setting is 60 seconds.
Load the next document.
Press Start.
Repeat steps and for the necessary number of copies.
When the machine has finished scanning all documents, select Last
Original.
Scanning of the document starts, and copies are delivered onto the output tray.
Avoid looking at the copy lamp directly when you are making copies with
the document cover open. Direct eye exposure can cause eye fatigue or
damage.
2
3
4
2 3
5
No. of Sets
No. of Pages
Originals
(A 4 )
Full Color
100%
1A4
Collated
:
1/1
:
100/100
:
1
Copy Job
Close
:Doc. No. 00002
Stop
Last Original
Next Original
To Next Page
Loading...
Need help?
General
