Fuji Xerox DocumentCentre C400 Series User Manual

408
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.30
Making Copies of Documents
at Different Settings in a Single
Operation - Build Job
Copies of documents can be made with settings for pages or the entire stack of pages
changed to be finally grouped together as a single job. This is called the Build Job feature.
If you make multiple copies when the Build Job feature is set, a sample copy is printed out
beforehand so that you can confirm the final output state of the copy. After you have con-
firmed the output state, you can change the number of copies or select whether or not to
output the remaining number of copies.
●
To use the Build Job feature, additional 128 MB memory must be installed.
●
Other features cannot be set while the Build Job feature is active. Interrupt copies also cannot be made by press-
ing Interrupt.
●
If you cancel a setting while the Build Job feature is active, all build job settings are canceled,
●
With this feature, the resolution is always processed at 600 dpi regardless of whether or not optional accessories
for high image quality output are installed.
Document
Copy
Sample copy
First setting
Next setting
Third setting
Copy
The preset number of copies is made.
Only one copy is made.
The remaining number of copies can be printed or
canceled depending on the output state
of the sample copy.

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English