Fuji Xerox DocumentCentre C400 Series User Manual

3.30 Making Copies of Documents at Different Settings in a Single Operation - Build Job
409
3
User Friendly Features
Basic Copying Added Features Image Quality Others
Combining the Build Job Feature with Other Features
The Build Job feature is sub-divided into two other features, a feature for making
settings on the entire job, and a feature for making settings on each document
that is loaded. The following table shows the possible combinations of features:
: Settings can be made by the Build Job feature, however they cannot be changed after
scanning of the document is started.
× : Settings cannot be made.
: Changes can be made to settings if you have not started printing or if you have not
instructed continuation of printing after outputting the sample print.
*1 : The paper tray for adding documents to cannot be changed when the booklet creation
feature is set.
*2 : Build Job (sample copy) settings cannot be changed after scanning of the document is
started.
*3 : With Build Job (by chapter), you can change whether or not to make settings for each
document that is loaded.
Feature
Ove
rall
Doc
ume
nt
Feature
Ove
rall
Doc
ume
nt
Document Glass Transparency Separators ××
Duplex Automatic Document
Feeder
Transparency Separators
(copies for distribution)
××
Paper Trays 1, 2, 3, 4 *
1
Image Rotation
Tray 5 (Bypass Tray) *
1
Original Type
Auto Tray Switching *
1
Background Suppression
Output Color Lighter/Darker/Contrast
2 Sided (1 → 2 Sided) Sharpness/Color Saturation
2 Sided (2 → 2 Sided) Color Shift
2 Sided (2 → 1 Sided) Color Balance
Auto/X-Y Auto Ratio Image Quality Presets
Standard/Any/Independent X-
Y%
Covers
Output (Collated) Booklet Creation
Output (Uncollated) ××Book Duplex ××
Stapling Image Repeat
Auto Center/Move to Corner Poster ××
Variable Shift Mirror Image/Negative Image
Border Erase/Center Erase
Build Job (Sample Copy) *
2
Original Size
Build Job (by Chapter) *
3
Mixed Size Originals Output Tray (Center Output
Tray)
Bound Originals Output Tray (Side Output
Tray)
Multiple Up Output Tray (Finisher Tray)
Original Orientation No. of Sets

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English