3.7 Outputting to the Finisher Tray - Output/Stapling
330
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.7.2 Stapling Copies
The following describes the procedure for instructing stapling of copies before
output.
Procedure
1
Load the document.
For details about loading documents, see “1.2 Loading Documents” (P. 270).
2
Select Output/Stapling in the Added Features screen.
The Output/Stapling screen is displayed.
3
Select Collated/Stapling.
4
Select Stapling.
The Output/Stapling screen is displayed.
Image Quality OthersBasic Copying
Menu
Added
Features
Output/Stapling
Auto
Center Output Tray
Original Size
Auto Size Detect
Multiple Up
1 Up
:
:
:2
mm
0
mm
2
mm
S1: No Shift
S2: No Shift
Margin Shift
Mixed Size Originals
Off
Separators
Off
Border Erase
Bound Originals
Off
Image Rotation
On during Auto
Staple Position
SaveCancel
Output
Collated or Uncollated will be
selected automatically according
to settings.
Collated will be selected when
Document Feeder is used.
Output Destination
Center Output
Tray
Finisher Tray
Uncollated
Auto
Collated/
Stapling
SaveCancel
Output
Stapling
Output Destination
Center Output
Tray
Finisher Tray
Uncollated
Auto
Collated/
Stapling
To Next Page
Loading...
Need help?
General
