Fuji Xerox DocumentCentre C400 Series User Manual

417
3
User Friendly Features
Basic Copying Added Features Image Quality Others
3.31
Specifying the Document
Orientation - Original Orien-
tation
The document orientation must be set to indicate the top of the document when using the 2
Sided, Margin Shift, Edge Erase, Multi Up (N Up), Image Repeat, Mixed Size Originals, and
Independent X-Y% features.
The value set for the document orientation becomes the default setting in each of the
screens for the above features. The document orientation, however, can be set in each of
these screens.
The document orientations are as follows:
●
Head to Top
Select this when placing the top of the document facing the inner side of the document glass or DADF.
●
Head to Left
Select this when placing the top of the document facing the left side of the document glass or DADF. When the
document is placed or loaded to face the left side (text horizontal), be sure to select Head to Left.
●
The default setting for Original Orientation can be changed in the System Administration Mode. For details about
how to change the default for this feature, see “5.5 Copy Mode Settings” (P. 139) in “Part 1 Hardware”. The
default setting is Head to Top.
●
When Bound Originals and Book Duplex are set, the document orientation is automatically determined to match
the document type setting.
Top
Bottom
Left Right
Top
Top
Document on document glass Document on DADF
Top
Bottom
Left Right
Top
Top
Document on document glass Document on DADF

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English