3.30 Making Copies of Documents at Different Settings in a Single Operation - Build Job
416
3
User Friendly Features
Basic Copying Added Features Image Quality Others
With the Build Job feature, the Chapter feature is automatically activated at the 1
Sided Copy and 2 Sided Copy switch points and at the tray switch points.
The Chapter feature makes copies on the top side on the first page of the next docu-
ment when the first loaded document ended at the top side due to the number of doc-
ument sheets being an odd-number during 2 sided copying. At this time, the back side
of the final page of the copy for the first loaded document becomes a blank sheet.
When 2 sided copying is continued on the next document and the same tray is used,
the Chapter feature does not function. If scanning of the first loaded document ended
at the top side, the next document will be copied from the back side of the final copied
page of the first loaded document.
To activate the Chapter feature, select Chapter Division before you load the next doc-
ument.
Output example when 1 Sided Copy and 2 Sided Copy are both selected.
Output example when 2 Sided Copy is selected twice.
Output example when 2 Sided Copy is selected twice and Chapter Division is selected.
3
2
2
1
1
6
5
4
3 4 5 6
Load the first document
<P>2-Sided Copy<P>.
Load the second document
<P>1-Sided Copy<P>.
When switching from <P>2-Sided Copy<P> to <P>1-Sided Copy<P>,
the back side at the switch point in
becomes a blank sheet.
1 2
1
Load the first document
2 Sided Copy.
1
Load the second document
1 Sided Copy.
2
When switching from 2 Sided Copy to 1 Sided Copy,
the back side at the switch point in
becomes a blank sheet.
1
3
2
2
1
1
6
5
4
3 5
4
6
Load the first document
<P>2-Sided Copy<P>.
1
Load the second document
<P>2-Sided Copy<P>.
2
When continuing with <P>2-Sided Copy<P>
after <P>2-Sided Copy<P>, copies are made
from the back side at the switch point in .
1
Load the first document
2 Sided Copy.
1
Load the second document
2 Sided Copy.
2
When continuing with 2 Sided Copy after
2 Sided Copy, copies are made from the back
side at the switch point in .
1
3
2
2
1
1
6
5
4
3 4
5
6
1
Load the first document
<P>2-Sided Copy<P>.
2
Load the second document
<P>2-Sided Copy<P>.
When continuing with <P>2-Sided Copy<P> after
<P>2-Sided Copy<P> and <P>By Chapter<P> is
the back side at the switch point in
becomes a blank sheet.
1
Load the first document
2 Sided Copy.
1
Load the second document
2 Sided Copy.
2
When continuing with 2 Sided Copy after
2 Sided Copy and Chapter is selected,
the back side at the switch point in
becomes a blank sheet.
1
To Next Page
Loading...