7.2 Confirming Jobs
256
7
Confirming Jobs
7.2.6 Making Prints at a Specified Time
You can specify the time to start outputting jobs on the client. When the specified
time is reached, printing of jobs stored to memory is automatically started.
Following describes how to output documents stored to memory by the Print at
Specified Time feature not at the specified time but when you want to output
them immediately. It also describes how to delete jobs.
If the machine is turned off then on again with specified output time prints stored to memory, output of
these prints will automatically begin regardless of the specified time setting.
For details about specified output time print operations, see the On-line Help of the printer driver for
details.
Procedure
1
Press Job Status.
The Job Status screen is displayed.
2
Select Stored Documents.
The Stored Documents screen is displayed.
3
Select Delayed Print.
The Delayed Print screen is displayed.
Stored
Documents
Current and
Pending Jobs
Completed Jobs
Job Status
00117-Copy Job Copying A4 : 100% 25/100
Doc. No. - Job Type Status Remote Terminal/Contents
Pages
Print Waiting
Jobs
00010-Print Job Print Wait Fuji Taro : MDG 0/120
00015-Print Job Print Wait Fuji Taro : MDG 0/50
Job Management
Secure Print
Sample Print
Delayed Print
Stored
Documents
Current and
Pending Jobs
Completed Jobs
Private Mailbox
To Next Page
Loading...
Need help?
General
