xvii
Read this section carefully before using the DocumentCentre 400/320/240 Series to ensure
that you operate your machine safely.
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials
such as curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment. Pro-
longed exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 215kg. If
tilted, the machine may fall over and cause injuries.
Instructions Unplug Ground/Earth
Heated surface Flammable Electric shock Pinched fingers
Prohibited No fire Do not
tear down
Do not
touch
This section explains the graphic symbols used in this guide.
is used to alert operators to an operating procedure, practice or condi-
tion that, if not strictly observed, may result in severe injury or loss of
life.
is used to alert operators to an operating procedure, practice or condi-
tion that, if not strictly observed, may result in safety hazards to per-
sonnel or damage to the equipment.
This symbol is used to alert operators to a
specific operating procedure that requires close
attention. Read and follow instructions carefully
to ensure the task is accomplished safely.
This symbol is used to alert operators to a
specific operating procedure that must not be
performed. Read instructions carefully and do
not perform any procedures that are prohibited.
This symbol is used to alert operators to a
specific operating procedure that must be
emphasized in order to operate the machine
safely. Read and follow instructions carefully.
Safety Notes
To Next Page
Loading...
Need help?
General
