443
Appendix
E
Error Codes Displayed on
the Display
This section describes the error codes that are displayed on the display.
Messages and error codes (***-***) such as those shown below are displayed when an error
occurs, preventing printing from ending normally, or when some trouble has occurred on the
machine.
E.1 Error Code Tables
When an error code is displayed on the display, remedy the error by referring to the corre-
sponding remedy for the error code in the following tables.
When an error code is displayed, the remaining print data or other information stored in the machine’s memory is not
assured.
Error Code Cause/Remedy
003-746
“Cause” A function (one of paper size, tray, output tray, or 2 sided printing) that
is incompatible with the specified paper quality has been specified.
“Remedy” Check the print data.
See “Chapter 3 Basic Printing” in “Part 1 Printer” of the User Guide (Printer/Scanner).
003-747
“Cause” An illegal print parameter combination was set. For example, a non-
standard size was specified, and Tray Selection was set to Auto.
“Remedy” Check the print data. In the above case, select Tray 5 (Bypass Tray).
For details about printing, see “Chapter 3 Basic Printing” in “Part 1 Printer” of the User Guide
(Printer/Scanner).
003-750
“Cause” The number of document sheets specified for the Book Duplex func-
tion exceeded the maximum stored pages.
“Remedy” Limit the number of document sheets to within the maximum stored
pages.
See "3. Maximum Stored Pages" (P. 153) at "5.5.3 Copy Control" in “Part 1 Hardware.”
Copy Memory 100%
Quantity
1
A fault or an error has occurred.
Refer to the User Guide for information on the fault code at right. (XXX-YYY)
Menu
Image Quality
Others
Basic Copying
Added
Features
Output Color Paper Supply
1 A4
2 A3
Auto
More...
Reduce/Enlarge
Auto%
100%
More...
50% A3->A5
70% A3->A4,B4->B5
2 Sided
1->2 Sided (H to H)
1->1 Sided
More...
2->2 Sided (H to H)
2->1 Sided (H to H)
Full Color
Auto
Black
Dual Color-Red/Black
More...
Plain
Plain
3 8.5 11’’
Plain