Fuji Xerox DocumentCentre C400 Series User Manual

5.4 Setting the System Settings (Common Settings)
123
5
System Administration Mode Settings
5.4.1 Machine Clock/Timers
Set the date and timer until a feature such as the Power Saver or reset is acti-
vated.
Machine Clock/Timers allows you to set the following items:
1. Date
Set the date of the machine’s system clock to 2000 to 2099 (year), 1 to 12 (month) and 1 to 31 (day)
using numbers. You can select from three date formats: Y/M/D, M/D/Y, and D/M/Y. The date set
here is printed on lists and reports.
(The default date format is D/M/Y.)
2. Time
Set the time (hours/minutes) of the machine’s system clock in the 12-hour system or 24-hour system.
Set hours within 0 to 23 (24-hour system) or 1 to 12 (12-hour system), and minutes within 0 to 59
using numbers. When the 12-hour clock is being used, morning (AM) or afternoon (PM) can also be
set. The time set here is printed on lists and reports.
(Default is 12 Hour Clock, AM, and 0 Hours 00 Minutes.)
3. Time Zone
Set the time zone.
Set the time difference from GMT.
4. Daylight Savings
Set the months and dates for starting and ending the daylight savings.
5. Auto Clear
Set whether or not to return the control panel to the default screen when it is not operated for a fixed
period of time. Set the time to wait before returning to the default screen to within the range 60 to
240 seconds (1 to 4 minutes) in 60-second increments.
Enter the setting value using the numeric keypad.
(Default is 60 (seconds).)
●
1. Date
●
5. Auto Clear
●
2. Time
●
6. Auto Job Release
●
3. Time Zone
●
7. Auto Print
●
4. Daylight Savings
●
8. Auto Power Saver
Setting Value Description
0 Auto Clear is not set.
60 to 240 Set the time to wait before returning to the default screen in 60-sec-
ond increments.

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English