Fuji Xerox DocumentCentre C400 Series User Manual

E Error Codes Displayed on the Display
447
Appendix
016-704
“Cause” The hard disk ran out of space as the mailboxes is full of stored docu-
ments.
“Remedy” Delete unwanted documents from the mailboxes.
For details, see “3.5 Checking/Deleting Scanned Data in Mailbox” in “Part 2 Scanner” of the
User Guide (Printer/Scanner).
016-706
“Cause” The hard disk ran out of space as the maximum number of users for
secure printing was exceeded.
“Remedy” Delete unwanted documents stored in the machine’s memory or
unwanted secure print registered users.
See “4.3 Secure Print” in “Part 1 Printer” or “3.5 Checking/Deleting Scanned Data in Mailbox”
in “Part 2 Scanner” of the User Guide (Printer/Scanner).
016-707
“Cause” Sample prints cannot be made as the Extension Box is malfunctioning.
“Remedy” Contact our Customer Support Center.
016-716
“Cause” The TIFF file could not be spooled as the size of the file exceeded the
remaining amount of space on hard disk.
“Remedy” Increase the size of the PCL form area.
For details, see “3.5 Checking/Deleting Scanned Data in Mailbox” in “Part 2 Scanner” of the
User Guide (Printer/Scanner).
016-721
“Cause” An error occurred during print processing. Printing was instructed by
Auto Tray Switching when Paper Type Priority was set to “Auto Tray
Switching Off” for all paper at Common Settings in the system settings.
“Remedy” When printing by Auto Tray Switching, set one of the paper types to a
setting other than “Auto Tray Switching Off” in Paper Type Priority.
See “ Paper Tray Priority” (P. 129) in “Part 1 Hardware”.
016-726
“Cause” The print language could not be automatically selected when the print
mode specification is set to Auto. PostScript data was sent without the
PostScript Software Kit installed.
“Remedy” The PostScript Software Kit must be installed.
016-728
“Cause” The TIFF file contains unsupported tags.
“Remedy” Check the print data.
For details, see “3.3 Configuring Scan Settings” in “Part 2 Scanner” of the User Guide (Printer/
Scanner).
016-729
“Cause” The TIFF file could not be printed as the number of colors and resolu-
tion of the TIFF file exceeded the upper limit of the effective range.
“Remedy” Change the number of colors and resolution of the TIFF file, and
instruct it to print again.
For details, see “3.3 Configuring Scan Settings” in “Part 2 Scanner” of the User Guide (Printer/
Scanner).
016-731
“Cause” Printing of the TIFF data was discontinued midway and all data could
not be printed.
“Remedy” Instruct printing again.
Error Code Cause/Remedy

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English