Fuji Xerox DocumentCentre C400 Series User Manual

E Error Codes Displayed on the Display
446
Appendix
016-500
“Cause” Could not determine the name of the SMTP server when reply mail
was transmitted.
“Remedy” Check from CWIS to see if the SMTP server is set correctly.
016-501
“Cause” Could not determine the name of the POP3 server when using POP3
protocol.
“Remedy” Check from CWIS to see if the POP3 server is set correctly.
016-502
“Cause” Could not log in to the POP3 server when using POP3 protocol.
“Remedy” Check from CWIS to see if the user name and password used for the
POP3 server are set correctly.
016-503
“Cause” Could not determine the name of the SMTP server when mail was
transmitted.
“Remedy” Check from CWIS to see if the SMTP server is set correctly. Also,
check that the DNS server is set correctly.
016-504
“Cause” Could not determine the name of the POP3 server when mail was
transmitted.
“Remedy” Check from CWIS to see if the POP3 server is set correctly. Also,
check that the DNS server is set correctly.
016-505
“Cause” Could not log in to the POP3 server when transmitting mail.
“Remedy” Check from CWIS to see if the user name and password used for the
POP3 server are set correctly.
016-701
“Cause” PCL print data could not be processed as there was insufficient memory.
“Remedy” Lower the resolution, or instruct printing again without setting two
sided printing or N Up.
For details, see the On-line Help of the printer driver.
016-702
“Cause” PCL print data could not be processed as there was insufficient space
in the print page buffer.
“Remedy” Take one of the following actions:
●
Set Print Mode to Speed Priority.
●
Use Ensure Print.
●
Increase the size of the print page buffer.
●
Add on memory.
●
See the relevant descriptions under “Part 1 Printer” of the User Guide (Printer/Scanner).
●
For details about Print Mode, the On-line Help of the printer driver.
●
For details about Ensure Printing, the On-line Help of the printer driver.
●
About print page buffer and additional memory, the On-line Help of the printer driver.
016-703
“Cause” A mail specified a non-registered or invalid mailbox No. was received.
“Remedy” Take one of the following actions.
●
Register the mailbox with the specified No.
●
Send a mail to a valid mailbox.
See the user Guide (Facsimile).
Error Code Cause/Remedy

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English