1.2 Loading Documents
271
Loading Documents
1
1.2.2 Loading Copies on the DADF
The DADF can accommodate a stack of up to 50 document sheets (plain paper)
of 148.5 × 210 mm to 297 × 432 mm sized paper.
Multiple-sheet documents loaded on the DADF are fed in one sheet at a time in
order from the topmost sheet, and are delivered with the copied surface facing
down. The following describes the procedure for loading documents on the
DADF.
A stack of up to 40 sheets of thick stock paper (101 to 128 g/m
2
) can be loaded at once on the DADF.
Procedure
1
Load the document making sure that its edges are neatly aligned.
Remove any clips or staples attached to documents.
2
Load the document with the copy sur-
face (in the case of a two sided docu-
ment, the top side) facing up, and align
it facing the direction of the arrow
aligned with the inner side of the
DADF.
The confirmation indicator lights.
3
Move the document guide to gently
touch the edge of the document.
Observe the precautions below as the document may
become jammed or damaged:
●
Do not press down on documents when they are fed
into the scanner.
●
Do not allow an excessive number of documents to
accumulate on the document tray.
●
Do not place anything on the document tray.
To Next Page
Loading...
Need help?
General
