Fuji Xerox DocumentCentre C400 Series User Manual

5.5 Copy Mode Settings
153
5
System Administration Mode Settings
5.5.3 Copy Control
Make settings related to control of copy operations.
Copy Control allows you to set the following items:
1. Auto Paper Off
Set the tray (tray that is switched to when Auto % or Independent X-Y% is selected in Reduce/
Enlarge when Auto is selected at Paper Supply in the Basic Copying screen) when Auto at Paper
Supply in the Basic Copying screen is canceled.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 1 as Select Tray 1.)
For details about Auto Tray Switching, see “ Auto Tray Switching” (P. 29) at “2.1 Loading Paper”.
2. Memory Full Procedure
Set the processing method when the hard disk runs out of memory during a job, for example, when sort-
ing copies. Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Disabled.)
For details about Memory Full Procedure, see “6. Auto Job Release” in “5.4.1 Machine Clock/Timers”
(P. 123) .
3. Maximum Stored Pages
Set the Maximum Stored Pages when copying documents. You can set any number of pages within
the range 1 to 999.
Enter the number of pages on the numeric keypad.
(Default is 999.)
●
1. Auto Paper Off
●
2. Memory Full Procedure
●
3. Maximum Stored Pages
Setting Value Description
1 Select Tray 1
2 Select Tray 2
3 Select Tray 3
4 Select Tray 4
Setting Value Description
0 Disabled (Discard stored documents.)
1 Enables stored data.

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English