5.8 Scan Mode Settings
172
5
System Administration Mode Settings
5.8.1 Basic Scanning Presets
You can change the ratios to be assigned to buttons that are displayed at
Reduce/Enlarge in the Scan Option screen.
Setting frequently used scan ratios frees you from unnecessarily setting the scan
ratio each time you scan a document.
The following items can be set on Basic Scanning Presets:
Reduce/Enlarge 2nd to 4th Button
Set the ratios to be displayed for the 2nd to 4th trays from the top down for each of the feature but-
tons displayed at Reduce/Enlarge in the Scan Option screen.
Select available ratios from those currently registered to the Reduce/Enlarge Presets buttons.
Enter the setting values using the numeric keypad referring to the table below.
(Defaults are as follows: 2 for the 2nd button from the top, 4 for the 3rd button, and 7 for the
4th button.)
●
For details on the R/E Preset buttons, see “5.8.5 Reduce/Enlarge Presets” (P. 180).
●
For details about how to set the Reduce/Enlarge buttons, see “3.3.7 Reduce/Enlarge” in “Part 2 Scanner” of
the User Guide (Printer/Scanner).
●
1. Reduce/Enlarge - 2nd Button
●
2. Reduce/Enlarge - 3rd Button
●
3. Reduce/Enlarge - 4th Button
Setting Value Description
1 Ratio currently set to R/E Preset 1
2 Ratio currently set to R/E Preset 2
3 Ratio currently set to R/E Preset 3
4 Ratio currently set to R/E Preset 4
5 Ratio currently set to R/E Preset 5
6 Ratio currently set to R/E Preset 6
7 Ratio currently set to R/E Preset 7
To Next Page
Loading...
Need help?
General
