5.5 Copy Mode Settings
142
5
System Administration Mode Settings
2. Single Color
Set the default of Single Color in the Basic Copying screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 1 as Red.)
3. Dual Color - Color Image
Set the default of Color Image under Dual Color setting in the Basic Copying screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 1 as Red.)
4. Dual Color - B/W Image
Set the default of Black/White Image under Dual Color setting in the Basic Copying screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Black.)
For details about Custom Color, see “5.5.6 Custom Colors” (P. 156).
Setting Value Description
0 Black (This can be set only when Dual Color is selected.)
1Red
2Green
3Blue
4 Yellow
5 Magenta
6Cyan
7 Specified color currently set to Custom Color 1
8 Specified color currently set to Custom Color 2
9 Specified color currently set to Custom Color 3
10 Specified color currently set to Custom Color 4
11 Specified color currently set to Custom Color 5
12 Specified color currently set to Custom Color 6
To Next Page
Loading...