Fuji Xerox DocumentCentre C400 Series

5.3 Setting and Changing System Administrator’s Passwords
120
5
System Administration Mode Settings
4
Select System Administrator Password.
The System Administrator Password screen is displayed.
5
Select On, and enter the new password using the numeric keypad.
6
Select Enter.
7
Enter the same password again as in step 5, and select Enter.
Enter the same number at steps 5 and 7. If you made a mistake when entering the password, select the
Reset button, and repeat the procedure from step 5.
Close
System Settings
System Settings
Auditron
Administration
Setup Menu System Administrator
Password
Close
System Administrator Password
New Password
Confirm Password
EnterReset
Off
On
Close
System Administrator Password
New Password
Confirm Password
EnterReset
Off
On
*****
Close
System Administrator Password
New Password
Confirm Password
EnterReset
Off
On
*****