5.4 Setting the System Settings (Common Settings)
135
5
System Administration Mode Settings
4. Photo Image Quality
This item can be set when more than 128 Mbytes of page memory and 512 Mbytes of system mem-
ory have been installed.
By selecting Speed Priority, copies will be made without falling speed in Photo mode with Original
Type.
When copying in Photo mode with Original Type, you can make copies that are closer to the origi-
nal’s quality by selecting Image Quality Priority.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Speed Priority.)
By selecting Image Quality Priority, the copy speed may be reduced to achieve image quality that is closer to the
original.
5. Color Copy Auto Exposure
Set how background color is removed when making copies in color.
Set how the machine detects the density of background color and processes to remove the back-
ground color. When Speed Priority is selected, a part of the document is sampled to detect the back-
ground color level.
When Image Quality Priority is selected, the machine pre-scans the document, and samples the entire
document to detect the background color level.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 1 as Speed Priority.)
6. B/W Copy Auto Exposure
Set how background color is removed when making copies in black-and-white.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 1 as Speed Priority.)
7. Image Enhancement
Smoothing is performed on the print data to reproduce smoother images.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 1 as On.)
Setting Value Description
0 Speed Priority
1 Image Quality Priority
Setting Value Description
0 Image Quality Priority
1 Speed Priority
Setting Value Description
0Off
1On
To Next Page
Loading...
Need help?
General
