Fuji Xerox DocumentCentre C400 Series User Manual

5.5 Copy Mode Settings
147
5
System Administration Mode Settings
13. Border Erase - Left & Right
Set the defaults for the left and right border erase dimensions of the document.
(Default is 5 mm.)
For details about setting left and right border erase, see “3.9 Erasing Edges and Margin Shadows in the Docu-
ment - Border Erase” (P. 340) in “Part 2 Copier”.
14. Center Erase
Select the default value for the Center Erase. The Center Erase is assigned referenced to the center
line of the printed image.
(Default is 0 mm.)
For details about setting center erase, see “3.9 Erasing Edges and Margin Shadows in the Document - Border
Erase” (P. 340) in “Part 2 Copier”.
15. Original Type (Auto/Full Color)
Set the default of Original Type in the Image Quality screen when Auto or Full Color is selected as
the Output Color in the Basic Copying screen.
Enter the setting values using the numeric keypad referring to the table in No.16.
(Default is 1 as Text & Photo (Halftone).)
Setting Value Description
0 None
1 to 50 Set the left and right border erase dimensions in 1-mm increments.
Setting Value Description
0 None
1 to 50 Set the center erase dimensions in 1-mm increments.

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English