3.20 Adjusting Tone - Color Shift
376
3
User Friendly Features
Basic Copying Added Features Image Quality Others
●
The default setting for Color Shift can be changed in the System Administration Mode. For details about how to
change the default for this feature, see “5.5 Copy Mode Settings” (P. 139) in “Part 1 Hardware”. The default set-
ting is Normal.
●
Adjustment of tone cannot be selected when Output Color is set to Black.
●
If Color Shift is selected when Image Quality Presets is set, the value set to Image Quality Presets will be can-
celed.
Procedure
1
Load the document.
For details about loading documents, see “1.2 Loading Documents” (P. 270).
2
Select Full Color at Output Color in the Basic Copying screen.
3
Select Color Shift in the Image Quality screen.
The Color Shift screen is displayed.
Menu
Image Quality
Others
Basic Copying
Added
Features
Output Color Paper Supply
1 A4
2 A3
Auto
More...
Reduce/Enlarge
Auto%
100%
More...
50% A3->A5
70% A3->A4,B4->B5
2 Sided
1->2 Sided (H to H)
1->1 Sided
More...
2->2 Sided (H to H)
2->1 Sided (H to H)
Full Color
Auto
Black
Dual Color-Red/Black
More...
Plain
Plain
3 8.5 11’’
Plain
Color Shift
Normal
Color Balance
Y: 0 0 0
M
: 0 0 0
C
: 0 0 0 K: 0 0 0
Original Type
Text & Photo
(Halftone)
Image Quality Presets
Normal
Auto Exposure
On
Sharpness/Saturation
Sharpness: Normal
Saturation: Normal
Light/Dark/Contrast
L/D : Normal
Contrast: Normal
Menu
Image Quality
Others
Basic Copying
Added
Features
To Next Page
Loading...
Need help?
General
