Fuji Xerox DocumentCentre C400 Series User Manual

1.3 Power Saver Mode
20
Getting to Know Your Copier
1
Procedure
1
Press Password/System Settings.
The System Settings screen or System Administrator - Password Entry screen is displayed. The Pass-
word Entry screen is also displayed when the totals management feature is active.
●
The System Administrator - Password Entry screen is displayed when an System Administrator’s
password has been set. When the System Administrator’s password has not been set, and you press
Password/System Settings button, the Administrator-System Settings screen is displayed.
●
When the System Administrator - Password Entry screen is displayed, enter the password referring
to “5.2.1 Entering the System Administration Mode” (P. 111).
2
Select System Settings.
The System Settings screen is displayed.
3
Select Common Settings.
The Common Settings screen is displayed.
Close
System Settings
System Settings
Auditron
Administration
Setup Menu System Administrator
Password
Close
System Settings
Common Settings Copy Mode Settings
Network Settings
Print Mode Settings Scan Mode Settings

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English