Chapter 2 Troubleshooting
2.3 Error Code FIP
2-73
FIP1.27 116-316 ESS DIMM Slot RAM W/R Check Fail
116-320 ESS DIMM Slot RAM Error
Step Check and Action Yes No
Parts considered to be the cause
KIT MEMORY (PL18.1.18)
PWBA ESS (PL18.1.2)
1
Check the installation of the KIT MEMORY
Is the Connector (P/J401) between the KIT MEMORY and
the PWBA ESS free of broken/bent pins, foreign sub-
stances, burns, and etc., and is the unit installed properly?
Go to Step 2.
Reinstall the
KIT MEMORY
2
Check after replacing the KIT MEMORY
Replace the KIT MEMORY.
Does an error occur?
Replace the
PWBA ESS.
(REP18.1)
End of work.
To Next Page
Loading...
