Chapter 6 General
6.1 Specifications
6-10
6.1.16 Installation Temperature / Humidity
The temperature and non-condensing relative humidity for installation is as follows:
z At operating: 10-32°C, 10-85%RH (No condensation)
z At standby: minus 20-40°C, 5-85%RH (No condensation)
6.1.17 Installation Altitude
0 to 3,100m
6.1.18 Installation Horizontality
Longitudinal levelness of table surface on which the printer is installed: 1 degree or under
Lateral levelness of table surface on which the printer is installed: 1 degree or under
6.1.19 Storage Temperature of a Toner Cartridge
The guaranteed period of an unpacked print cartridge is as follows:
Normal conditions: 24 months under 0 to 35°C, 15 to 80% RH.
Harsh conditions: 1 month under -20 to 0°C and 35 to 40°C, 5 to 15% RH and 80 to 95% RH.
The storage altitude shall be 0 to 3,500m. Can be extended to 0 to 15,000m when shipped by air.
(Provided that the cargo bay is pressurized to 70.9275Kpa or higher.)
6.1.20 Applicable Laws and Industry Regulations
Table 6-11
Item M/C Specification
Safety Standard
110-127V M/C UL60950-1, CSA 22.2 60950
220-240V M/C IEC60950-1 / EN60950-1
Laser Safety Standard
110-127V M/C FDA21CFR Chapter 1, Subchapter J, Section 1010, 1040
220-240V M/C
IEC60825-1 Amendment 1 + Amendment 2 / EN60825-1
Amendment 1 + Amendment 2 Class 1 Laser Product
To Next Page
Loading...
Need help?
General
